The first thing I completed was a squad of Terminators. In previous incarnations of the army, Grey Knight Terminators were the mainstay of the force. This isn’t as true as it once was but Terminators as a troops choice is still an appealing prospect. There are a lot of options in the box and the codex lists a bewildering array of builds for each terminator in a squad. I thought about magnetising them but figured that I was probably going to field them as a mostly vanilla squad so I gave them a mixture of free upgrades and left it at that. The arms were painted separately on some of the figures as the two-handed weapons are held in such a way as to make painting the figure difficult when they are attached.

I wanted to try and experiment with different ways to paint Marines and the method I chose for these wasn’t entirely successful in the end. To start with I airbrushed them all Chainmail, then I sprayed in some Charadon Granite/Badab Black into the lowlights. I’m trying to do a similar effect to non-metallic metals but using metallic paint while still keeping the extreme contrasts between highlights and lowlights. Once the lowlights were sprayed into armour joints and the lower facing areas of plate, I started to shade with Mithril Silver and Vallejo Ivory. This part was done with a brush rather than with the airbrush. I hatched Chainmail across the plates to smooth the lowlights a little and then built up the highlights on the upper surfaces before applying a glaze of Enchanted Blue to smooth everything out and to break the harsh silver. Finally I added the extreme highlights in white and ivory.

Next up were the Nemesis Force Weapons and I was pretty excited about being able to do these superfast with the airbrush. “Haha!” I thought, “no tedious blending for me!” I masked half of each side of each blade and went to work then repeated the process on the other half. Unfortunately the tape I used lifted the paint off which meant that I had to do so much tidying up with the brush that I ended up practically painting the entire blades by hand anyway. They started off Mordian Blue and then had Ultramarines Blue painted across the flat of the blades before the shimmer patterns were painted in with Ice Blue and Skull White. This is easier than it looks, it’s just time consuming. Very thin paint and very fine strokes in a diagonal hatching pattern are what you need with a few lines outside the main lighting area to provide some relief.

With the blades done it was time to finish off all the detail. The gold was painted with Tausept Ochre before a thin coat of Vallejo’s Oro Glorioso was applied over the top. Then a wash of Brown Ink defined the details before the individual letters and other details were then picked out with a Mithril Silver/Oro Glorioso mix. The Stormbolter casings and the pauldron shields were painted with Scab Red and this was highlighted with Tallarn Flesh mixed with a little Blazing Orange. Heraldic patterns were painted on in Skull White and Chaos Black. Someone senior at GW – I seem to remember that it was Alan Merritt but I may be mistaken – once explained to me that red, white and black are ‘good fascist colours which is why they are used so much for the Imperium’. Regardless, they provide a very bold scheme to make detail pop so I reserved their use for heraldry.

The bases are resin Ruins bases from Microart Studios. I bought a bunch of them in all the sizes I’d need for a Space Marines army so I have some at 25mm for power-armoured marines, 40mm for Terminators, 60mm for Dreadnaughts and a couple of 120mm oval bases for a Stormraven and a Dreadknight. As the army has a low model count and every figure is elite, I could justify putting everything on a special base. These were painted Charadon Granite and then drybrushed in Graveyard Earth and Codex Grey.

Next up was a Razorback as a way to test vehicle painting with the airbrush. Again, this was sprayed Chainmail and then the Charadon Granite/Badab Black mixture was liberally sprayed into the angles between armour plates. Successive thin coats of Chainmail were then sprayed in blend these lowlights in and I did a few passes with Mithril Silver over the upward facing plates. Then the recesses in the tside armour were masked off and Scab Red was sprayed in there as well as on the cowling for the lascannons. The red was highlighted in the same way as for the Terminators’ Stormbolters and then I wen to work with some freehand. I want the Grey Knight vehicles to look baroque and covered in battle-honours so I painted in a chapter symbol on one door along with some gold scrollwork on the red recesses. The gold was shaded by painting thin lines of black and white around it to make it stand out from the red background and I took the oppportunity to abuse my classical education with some cod Latin on the scroll and the side of the lascannon housing (‘Lux ex Umbra’ means Light From the Shadows). One front glacis was painted with heraldry that will eventually match a Strike Squad Justicar  and the other got a numerical designation in accented gold.

The lenses  in the cupola were painted in much the same way as for the Nemesis Force Weapons, thin hatching patterns of Ice Blue and Skull White over a Mordian/Ultramarine Blue base.  Some final highlighting on the edges with ivory and the tank was done. I didn’t paint the interior on this one but I may well do for future tanks. I have a half completed Stormraven which has got as far as a detailed interior and a basecoat on the outside so far, any Landraiders will also have detailed interiors for sure.

Overall I’m enjoying painting these more than I expected I would, the figures are gorgeous and by stretching myself with the ‘true-metallic metal’ technique I can learn more about painting through these. I haven’t got the technique down properly yet but I have a few more squads to paint and I’ll keep experimenting with each one.

You can see more photos of the finished Grey Knights as well as some work in progress shots on this gallery page.

Originally this was part of the 8 armies initiative that I was doing along with some friends from work. The idea was that we would all build up WFB armies together and play against each other as well as enter some of the local tournaments as a group. Progress has been spotty for most of the people involved and, while most people have at least a couple of units painted up each, no-one except me actually has a playable army. I’ve ended up with about 3000 points of Chaos Warriors with a strong Tzeentch theme and visual connection so I’m scoring it as a win. Some of the units have been showcased here already – particularly the Chaos Knights and the Army Standard Bearer but most of the army hasn’t been photographed properly until tonight so here is the rest of it as well as some writeups for the more interesting pieces.

First up is the Chaos Knight Champion. When I painted up the Chaos Knight unit a while ago, I painted each of them individually as I wanted them to stand out. This looked good but it made it hard to determine which of them was the unit champion as they all looked ‘special’. So I decided to convert up a champion figure who would stand out in a unit of individuals. I cut and greenstuffed a Chaos Steed so that it was rearing up, greenstuffed the rider so he was leaning forwards in the saddle and then reversed the grip on his lance so he would be stabbing downwards rather than holding it at parade rest. After that it was time to paint him and I needed the colour scheme to be just as eyecatching as the pose. For this I decided to go back a little to a slightly older version of the Chaos lore and make the champion a corrupted Bretonnian knight who has succumbed to the insidious wiles of Chaos. This reflects the older, more Faustian background rather than the current barbarian-centric version. The idea was that his original armour and barding has fused to him and become his chaos armour and the iconography of Chaos is bleeding through and subsuming the older Bretonnian heraldry. I did a a fairly simple heraldic pattern – per pale azure and argent lozengy gules, in the first two fleur de lys or. This was repeated on the armour plates of the horse barding as well as on the rider himself, his breastplate is in pale to match his arms and his shoulderpads bear the charges, blazons and fields of the appropriate side too.

Next are a brace of Chaos Sorcerors. I have two in the army, both with the Mark of Tzeentch. One is on foot and generally goes in the Warriors unit, the other is on a Disc and hunts alone. The disc-rider is one of the first units I painted for this army but I never got around to photographing him. He’s the limited edition version released to celebrate 10 years of GW Italy and GW Germany and is a really nice figure. I’ve done him with the tentacles fading from purple to pink with a fairly standard blue and yellow scheme for his armour and robes. The Sorceror on foot is likewise in blue and yellow and I’m particularly pleased with the highlighting on the back of his cloak.

10 Marauder Horsemen were another early addition to the army. These were painted fairly fast but came out looking good despite that. I used these guys as test beds for a lot of the techniques I’d use to knock out regular Marauders as quickly as possible later on. I tried not to make them too uniform so the horses are different colours and I’ve used a limited palette on the riders to make them all individual while still keeping them coherent as a unit. They have spears and a full command group which isn’t optimal and they’ve been left on the shelf for the past few games. I’m pessimistic about their effectiveness in 8th edition and they are a low priority for most lists I build these days. I guess they could be decent warmachine hunters but any army with warmachines is likely to have enough missile fire to shred light cavalry with ease. In a similar state of limbo are ten Chaos Warhounds that were added shortly after the horsemen. These are very quick to paint and also don’t seem to have much of a role any more.

The Chaos Knights have already been featured on this blog so I’ll only quickly recap these. I painted them all as individuals to reflect their status as warrior nobles amongst the rest of the army. Each of them has a different theme going on that transfers from the steed to the rider and includes the barding. Generally these ride with the Battle Standard Bearer who has also been featured previously. I run these guys with the Mark of Tzeentch and the Banner of Rage. The Battle Standard usually carries the Blasted Standard and this combination makes the unit pretty terrifying as it is frenzied and has a 4+ ward save vs all missile fire. Because the frenzy applies to the whole unit, it also means the steeds benefit which can be vital when hitting units with a high static combat resolution. Many people seem to have written off heavy cavalry in 8th but these guys are very often the army’s MVPs.

A block of Marauders grew organically over the army’s evolution. Originally there were 15 but as 8th added more benefits for larger blocks of troops they expanded in stages to their current headcount of 30. These have flails and are usually fielded in horde formation. I’ve painted them with a palette of only five or six colours to tie them together and they are definitely fast and dirty as far as quality of finish is concerned. I also have Wulfric the Wanderer and, when playing in a game where special characters are allowed, he joins the Marauders to give them his special deployment rule. In other games he’s either left on the shelf or is fielded as a regular Exalted Champion.

A Warriors of Chaos army of course should have Chaos Warriors in it and mine has 19 in a single unit (the extra spot is usually taken by the Sorceror on foot). As with the Marauders I’ve tried to mix the colours up while sticking to a fairly limited palette. I’ve used four or five different armour colours and three or four different cloak and fur combinations. These were all painted very fast – for some reason every time I played at a tournament I’d discover that my list required more warriors than I actually had ready to go so I’d spend the night before each event speed-painting half a dozen more.

Finally I have my block of Chosen. These are somewhere between the Knights and the Warriors in theme. I’ve made them all different but not to the same extent as the Knights, rather there are repeated colours in the unit but they are in general more individual than the warriors as befits their status. The champion has stone coloured armour, the rest are a mix of dark blue, pale blue, red and purple with one in particoloured blue and red armour.

You can find more images including some work in progress shots on this gallery page.

The Seetroll event was a doubles tournament with each player bringing along a 1500 point army built under a zero comp system. Originally my plan had been to go along with Mario and his Tomb Kings but he was unable to go at the last minute so I roped in New Guy Ryan as my doubles partner, thrust my daemon army into his hands and ran a couple of test games the day before the event to shake down the new rules. Ryan had played 40k previously some time ago but had never played WFB, for my part I’d never played 8th edition before so this was a pretty steep learning curve for both of us. I wrote both of the army lists based largely on what I had painted rather than on any optimal list-building considerations, despite this however the two forces worked well together. We had:

Daemons:

• Herald of Tzeentch (General with Daemonic Robes)
• Herald of Slaanesh (BSB, Level 1 wizard with Siren Song and Soporific Musk)
• 23 Horrors with full command
• 27 Daemonettes with full command and Siren Standard
• 5 Flesh Hounds plus Karanak
• 6 Flamers

The Chaos Mortals fetaured:

• Sorceror Lord of Tzeentch (level 3 with a Disc, Golden Eye of Tzeentch and Infernal Puppet)
• Exalted Hero (BSB, on a chaos steed with the Blasted Standard)
• 5 Chaos Knights of Tzeentch with full command and Banner of Rage
• 15 Chaos Warriors f Tzeentch with full command (hand weapons and shields)
• 15 Chaos Marauders with full command (flails and light armour)
• 10 Marauder Cavalry with full command (spears and shields)
• 10 Chaos Warhounds

I’d finished the Chaos BSB the week previously and had started work on the Warriors, only 7 were painted by the night before the event but a late night speed-painting session got the remaining 8 done in time for us to field two fully painted armies. When we got to the event we found that named characters weren’t allowed so Karanak got swapped out for two ordinary Flesh Hounds which were kindly lent to us by one of the judges.

There were two games for the event both using the Meeting Engagement scenario from the book. Our first was a mirror match versus a Marauder heavy Warriors of Chaos army and a Daemon army based on a huge block of Plaguebearers. We lost this game despite some sterling work from the Chaos Knights. We’d actually run out of time before the game ended and there were still two turns left to play when we finished, this was something of a bonus to us though because things were starting to get really ugly and, if we’d played the last turns then the result would have been worse for us I think.

The second game was against the rather unlikely combination of Lizardmen and Orcs. This one went much better for us, we were able to control the battle much more and this brought us a conclusive victory – the Orcs had been largely wiped out along with most of the Lizardmen with the exception of the large block of Saurus warriors that we’d successfully avoided engaging all match.

We were expecting a mid-table finish on the balance of our win/loss record and were hugely surprised when our names were called to receive the third prize. First doubles tournament for either of us, first 8th ed event for me and the third and fourth games of WFB ever for Ryan meant that this was quite the result for us. On the train home Ryan was eagerly planning out a Daemons of Khorne list to pit against the rest of us.

The Warhammer Fanatics’ event was a very different affair, minimal comp (only some specific army restrictions and clarifications) and a 2250 points limit. It was also much better subscribed than the Seetroll event. My army (which to my shame wasn’t fully painted) was as follows:

• Sorceror Lord of Tzeentch (General, level 4, Disc, Golden Eye of Tzeentch, Ogre Blade, Spell Familiar)
• Exalted Hero of Tzeentch (BSB, Blasted Standard, Chaos Steed)
• Wulfrik the Wanderer
• Chaos Sorceror (Infernal Puppet)
• 5 Chaos Knights of Tzeentch with full command and Banner of Rage
• 17 Chaos Warriors of Tzeentch with full command and Razor Standard (hand weapons and shields)
• 10 Chosen of Tzeentch with full command, Lichebone Pennant and Book of Secrets (Halberds)
• 10 Marauder Cavalry with full command (shields and spears)
• 10 Chaos Warhounds
• 24 Marauders with full command (light armour and flails)

The events of the previous weekend had demonstrated that small blocks of weak troops are now a waste of time. Go big or go home. I wasn’t ready to put down a block of forty Marauders in Horde formation as our first opponent did last week (in fact he had two such units!) but I certainly needed to beef up the marauders. I inflated their numbers to 23 and put Wulfrik in the front rank to add some punch and give them his surprise deployment rule. The Warriors also saw a marginal increase in size although they didn’t really need it. They were bodyguarding the level 1 sorceror in this list and proved to be a very valuable unit. Before playing many games of 8th I’d been wavering over the role of the Chaos Knights. I wasn’t convinced that five of them plus the BSB were going to be a viable force. The test run at the Seetroll event demonstrated very clearly that these were still a ridiculously powerful unit even at the minimum size and that I needn’t worry too much about filling out their number.

There were three games over the course of the event and my first was against a Dwarf player with a fairly standard melee-focussed army. He had an Anvil, a large block of Longbeards, a large block of Warriors, two Gyrocoptors, a cannon and a Grudgrethrower. A Dwarf Queen carried to battle on her shield and a couple of Runesmiths rounded out the force. He played very conservatively indeed and didn’t use the anvil to push forwards as he really should have done, as a result he handed me complete control over the battle and I was able to demolish each of his units on my terms. At the end of the battle he had no surviving Dwarfs at all and I hadn’t given up a single victory point. Only some really incredible flee rolls coupled with some terrible pursuit results kept him in the game past turn four.

After this mauling I was firmly in first place and so my second opponent was the Dark Elf army in second position. This battle used the Dawn Assault scenario which mixed things up a bit and led to some interesting developments in setting up. The Dark Elves featured a huge unit of Spearmen in horde formation, a respectably sized unit of Executioners, a Hydra, two units of Harpies, a unit of Dark Riders, a Sorceress on a Dark Pegasus, two repeating bolt throwers, a small unit of Crossbowmen and a minimum sized unit of Cold One Knights led by the Highborn. By turn two I was convinced that I had lost, my Knights had crashed into his Spearmen and been filleted thanks to the Cauldron giving them the Killing Blow ability, the Cold One Knights were tearing chunks out of my support units and Wulfrik was nowhere to be seen. I’d managed to get most of the Executioners to murder themselves with the Treason of Tzeentch spell but I couldn’t see how I was going to score many victory points from this army. Luckily it seems that Chaos Warriors are the new Daemons for 8th edition, even a complete numpty can just keep pushing them forwards and expect not to lose too heavily. So, despite my army getting smacked repeatedly in the face for the first half of the battle, it absorbed the abuse the Dark Elves were piling on it and came back out fighting.  Wulfrik turned up on turn 5 and helped the surviving couple of Knights to finish off the Spearmen, The Executioners were wiped out by the Warriors and the Marauder Cavalry and the Chosen had finished off most of the Dark Elf support units. All that was left by the end were half of the Cold One Knights, the Hydra (which had failed to engage anything in the entire battle) and the Sorceress. My Lord was dead but the Warriors were still intact. The last turn had the Warriors facing down the Cold One Knights and the Hydra, I moved them backwards to make the charge less reliable and my opponent decided not to risk it. I was pretty sure I’d lost but was optimistic that I’d done enough damage to score some points. As it turned out I’d lost by 155 points which resulted in a draw.

After that bloodbath, I had dropped to second place so my last game was against the new tournament leader with his Goblin army. This battle was the Meeting Engagement scenario with the added twist that each player could kill one enemy character before the battle (and score full victory points for it). Rather unsurprisingly my opponent chose to remove my Sorceror Lord from the battle and I deprived him of Skarsnik in return. His army was almost entirely Goblins with only a single Orc present (a level 4 Shaman), it featured a horde sized block of Squigs, two hordes of Spear Goblins, a couple of small units of archers, a Doom Diver, a rock lobber a unit of Trolls and two minimum sized units of Wolfriders. Various Goblin Shamans, a BSB and a goblin Warboss were scattered around the list to fill it out. Again, this battle was one that went very badly for me to begin with and ended up turning around due to the incredible resilience of Chaos Warriors. Wulfrik turned up on turn 1 and destroyed the Rock Lobber before getting wiped out by the Squig herd, the Chaos Knights took on the Trolls, routed them and carried on through to the archers but couldn’t catch the fleeing monsters and also triggered every fanatic in the army in the process. Despite this a couple of Knights survived and slaughtered the archers. My level one wizard sent a Purple Sun of Xereus towards the Goblin line but fluffed it and it went across the Chosen instead. Luckily they all survived but it demonstrated how neutered my magic was without the Sorceror lord. By comparison the Orc magic was devastating, the various direct damage spells did very little thanks to the high toughness and thick armour of the Chaos army but the Waaagh! spell was used in almost every turn to staggering effect. Goblins that can get in surprise charges that always strike first and can reroll misses are not to be underestimated and this was the downfall of Wulfrik’s Marauders, the Chaos Knights and the Marauder Cavalry. Even the Warriors, who had easily been the most reliable unit in the army prior to this match ended up failing break tests and running away from the cackling Greenskin tide. At the end of the game I’d caught up a little but I had still clearly lost. In the end there was a 560 VP difference which translated to a 12-8 loss.

I’d scored 38 tournament points in my games which put me in 6th place on battle results, I dropped some points on the soft scores due to the unpainted models in my army and so my final placing was 7th. I wasn’t particularly unhappy with that despite the fact that I’d dropped so many points in my second and third games. the opposition was very tough and the games were hard fought.

This figure and twelve Chaos Warriors are the only parts of my list that weren’t already painted. I’m confident that I can crank out a dozen warriors in a week so it was a relief to finally declare this guy done and move on. It often happens to me (and I’m sure every other painter in the world) that I’ll start working on a figure and it just won’t come together. The figure will then get sidelined while I work on other things and sit partially done on my painting table for ever – let me tell you about my Dwarf Rangers that probably need less than two hours work to finish off but have sat in a case for four years. This figure was one of those that I couldn’t get on with at first. It started off as simply the normal metal Chaos Lord on Daemonic Steed figure with no modifications. I liked the figure but had no clue how to paint it – especially after I finished the rainbow-hued Chaos Knights regiment that you can see in this update.  Somewhere along the line I decided that I needed a mounted battle standard bearer and this figure seemed an obvious place to start from. The conversion is very simple; the hammer was cut off right above the hand and was replaced with a spear from the Marauder Horsemen sprue. The banner itself and the banner top also came from the Marauder Horsemen and I swapped the head for one from the Chaos Mutation sprue.  I also decided that I didn’t want the steed to be a Daemonic Mount but instead to be a ‘normal’ Chaos Steed so it got rebased onto a regular cavalry base.

When it came to painting this figure I really had no idea how it was going to end up. In the end I pretty much just threw paint at it until I could see something worthwhile emerging then tidied that up. Originally the armour and barding were to be a pale rosy lavender so I started with a bright pinky-blue basecoat and glazed it with Hawk Turquoise. That didn’t work so well and I ended up repainting it in a greyish purple which ended up getting highlighted and declared good enough. The horse was going to be black with flamey accents but that didn’t look so good with all the detailing on it so it ended up a chestnut colour instead with reddish hair. Finally the banner. I painted it blue then yellow, highlighted that right up and then sketched in the freehand design in the centre using Black Ink. Once I’d got something I was happy with I blocked it in and highlighted the pattern. At this point I realised that somehow I’d finished it. This was a nice surprise so I built up a taller base from smaller square bases and greenstuff to help him rank up properly (he overhangs the sides of a base even more than the plastic Knights do) and slapped some varnish on him before I could talk myself into doing more. He’s a little fussy and there are some messy areas but from 3 feet away he looks fine.

The full Warriors of Chaos Gallery is available here.

Anyhow, the latest addition to the collection of painted figures is this unit of Chaos Knights. My Warriors of Chaos army has a Tzeentchian theme to it and for me, the standard black and brooding colour scheme doesn’t really work. Additionally as these are amongst the most elite warriors in the army (actually they are pretty elite compared to most things in any army), I wanted them to be individualistic and unique. So it is then that I decided to paint them each with a different colour palette to show their status as the warrior nobility in the warband. These are really nice models and come with a variety of options for heads, shields and weapons – more than enough of each to avoid any duplication. They are also big, the barded Empire warhorses as used by the Knightly Orders for example are about two-thirds the size of these monsters. You will need to take care when assembling them and when attaching them to their base to make sure that the unit will rank up (mine doesn’t) as they overhang significantly on both sides of the base. I’m expecting that I will buy a second box for a larger unit (hello 8th edition!) and they will be planted at the extreme backs and fronts of their cavalry bases so that they can rank up between these. That’s something for another day though.

The first figure I completed was the champion. Actually he may not be the champion after all as I’m still somewhat undecided. All of the figures that aren’t carrying a standard or a horn could reasonably be used as the champion as they are all distinctive enough. This guy at least has a lightning charged sword which may tip things in his favour. He’s painted over a white basecoat (they all are actually) with Orkhide Shade which was washed with Thraka Green and then highlighted and glazed with a variety of greens and purples to get a nice rich effect on the armour. The horse is Thraka Green over the white undercoat and then highlighted and tidied up with thinned down Goblin Green and Skull White.

I did the sword purple with purple lightning all over it and this is a cool effect that’s easy to achieve if you take it a step at a time. First paint on very thin lines roughtly where your lightning will go, these can be quite broad and should be about a half shade above the base colour – the same sort of difference you’d use for a highlight. Then you highlight the centre of these lines in a slightly more erratic way so that the highlight follows more closely the final line of the lightning itself. After this you paint in the lines of the lightning bolts in a very pale colour,  I printed out some photos of lightning to use as a reference for the way that it forks and flashes to and fro. These lines need to be very thin and some need to be  painted in as almost invisible wisps in very thin paint. Finally take some pure white and highlight parts of the line, major branches and so forth. It’s time consuming to do it properly but it looks really nice.

Next up was the Bone Knight. I put this guy together specifically thinking that his weapon, shield and armour detail would look good in bone. He’s done in my normal bone style which is yellowing and aged looking rather than stark and white. It starts off as Snakebite Leather and gets highlighted up with Bleached Bone and Skull White. His horse and the detail trim were painted grey and the mail barding on the horse was given a pale bronze effect by washing Chainmail with Gryphonne Sepia and then highlighting with a mixture of Mithril Silver and Burnished Gold.

I tackled the standard bearer next, and I’d decided I liked the idea of a yellow knight. Blue and yellow are traditional colours for Tzeentch and I wanted to feature them both. I didn’t want this guy to look like a Tonka toy though so I kept the yellow dirty by painting it onto a Snakebite Leather base and highlighting with Bubonic Brown and Golden Yellow in a hatching pattern rather than as a smooth highlight. The banner was done on a base of Hormagaunt Purple and highlighted up with various blues. Finally a starfield was painted on with a Tzeentch icon painted in as if it were a constellation. I may redo this later as I’m not 100% happy with it but it’s good enough for the tabletop at the moment.

By now the end was in sight and I went for the musician. This was the blue one to balance the yellow standard bearer. The base of Mordian Blue was give the same treatment as the green armour on the first knight although this time using blue and purple washes and glazes. It was highlighted with Ultramarine Blue and curlicues painted in with very thin Enchanted Blue on the flat parts of the armour and shield. The metallic pieces were painted Mithril Silver and then washed with successive layers of watered down red, blue and purple inks. They were then highlighted with Dwarf Bronze and Burnished Gold. This was an experiment that I had no idea on how it would end up but I’m happy with the result.

Finally I tackled the lancer. My Chaos knights will all be fighting with hand-weapons but, in the interests of making the unit look less uniform and also because I really liked that particular weapon, I equipped one with a big choppy lance. This guy was originally going to be white but I decided that this would be too bright and so it ended up a very pale dove grey. This is Codex Grey with a Devlan Mud wash and then highlighted up with Fortress Grey, Space Wolf Grey and Skull White. The horse is Devlan Mud over the white undercoat and then highlighted with Graveyard Earth and Kommando Khaki.

You can see more pictures of the Knights on this gallery page.

I’ve wanted to improve the quality of the photography and short of dropping a couple of thousand Euro or so on a decent DSLR and a macro lens, I figured that lighting would make the biggest difference to my set up. It turns out that I was right. I found a ‘Portable photo studio’ from an eBay reseller for £28 and I’m very happy with it. Basically it’s a folding lightbox with two separate 500w spotlights and a camera stand. The whole thing folds neatly away into a sturdy polyester case which includes pockets on the outside for the lights and other hardware. It couldn’t really be described as professional quality gear but for change out of thirty quid it seems like good value.

So anyway, having taken delivery of my new toy, I was eager to play with it! Here is a quick run through my Cryx army for Warmachine. I picked Cryx for the same reason that I ended up with most of my armies – I really liked the models. While I was working for WAR in Dublin we had a short office campaign that took place in the cellar beneath the company HQ, I did reasonably well there and found that I quite liked the way that the Cryx played on the tabletop as well. Since then I’ve taken them to a bunch of tournaments here in Germany with varying amounts of success, generally I find that I either get a caster kill fairly quickly or I lose.

These figures were mostly painted over the course of a couple of months approximately two years ago, they are definitely table-top standard rather than display standard and some of them are showing signs of battle damage. To begin with, our campaign only allowed units from the Prime (Mk.I) book and Escalation, since then I’ve only added the Nightmare to the army. Thus the army doesn’t include any epic Warcasters, nor any of the character or ally units such as Cephalyx. I will eventually add some of these (in fact Lich Lord Asphyxious is on my painting table at the moment) and I’ll write them up as separate projects as they are done.

All that out of the way then, let’s take a look at the figures.

These two are my most commonly used Warcasters. In particular I like to bring a stealth-heavy army with Deneghra leading it. I’ve tied the army together by using a fairly limited palette of dark grey  and corroded bronze with green and pale grey accents. Silver metallics are used sparingly and mostly as contrast. The bronze colour is a custom mix of Tin Bitz, Chainmail and Shining Gold, this is then washed with a custom ink mix of Dark Green Ink, Chestnut Ink and Black Ink before being highlighted with Burnished Gold and glazed with Hawk Turquoise. The grey is mostly Shadow Grey highlighted up. For some figures such as the Skarlock Thrall the grey is applied over a dark brown basecoat to provide deep shading.

Green is used for the detailing in the steam engines for the necrotite glow. This starts as Goblin Green, washed with Dark Green Ink and is then highlighted with Scorpion Green and Skull White to produce a glowing effect. A similar pattern is used for the thrall runes on the Bane Thralls’ axes.

Of course the centre of any Warmachine force are the ‘Jacks and mine is no exception. My force includes a Reaper, Slayer, Nightmare, Stalker and five Bonejacks of various types based on the Defiler hull. These again use a mid-grey main colour with metallics for the exposed machinery and various spot colours. The Reaper that you see above left features runes in Scab Red on the hull and weapons, other ‘Jacks have patterns painted in with a slightly paler grey this breaks up some of the large, flat surfaces and also helps to identify them on the battlefield.

Finally then the army is rounded out by a selection of Thralls. I love the damage that Bane Thralls can inflict and I’m also a fan of the problems that Bile Thralls can cause the enemy, they are awesome suicide troops and no sane opponent will let them get close. I have a Machine Wraith which I love the figure for but which hasn’t really worked out for me on the table so far, my sole Pistol Wraith likewise has been a disappointment. I suspect that this is a case where adding a second one would make a huge difference in the effectiveness of both types. My favourite solo however is the Bloat Thrall, this thing is just horrible and attracts a lot of attention from the enemy. Painting it was a lot of fun too.

Check out the whole collection on the Cryx gallery page.

To begin with I started from Lysander, Captain of the Imperial Fists’ First Company. This is a popular choice for Belial conversions as it’s an ornately armoured Terminator in a fairly dynamic pose. The first thing to do was to remove all the Fists’ iconography which was pretty straightforwards – there’s a fist on his gorget and one on each tasset. These are simple to remove. I also cut out the hand part of the fist shape that makes up part of the head of his Thunderhammer. One of the requirements was that the figure should have interchangeable weapon loadouts. As he’s a Terminator this is a piece of cake – all you need to do is have the relevant weapon arms and magnetise them. In Belial’s case he can have either twin Lightning Claws, a Thunderhammer and Stormshield or a Power Sword and Stormbolter. As I don’t collect Space Marines myself I don’t have a stock of bits to scrounge in so I also bought the Dark Angel upgrade sprue which provided the Power Sword, Stormbolter, Storm Shield and some other small parts. I was also sent a pair of Lightning Claws and shoulder pads by the owner of this piece. Right away I had a problem; I had three left arms and only two left shoulderpads – these are the ones that have the Crux Terminatus sculpted on. One was integral to the Storm Shield arm and the other was the plastic one that I was sent along with the Lightning Claws. I solved this problem by cutting the left Lightning Claw and the Power Sword arm off just below the shoulder, magnetising them and then attaching the shoulderpad to one of the orphaned shoulders which then received two magnets (one to attach to the body and one to attach the rest of the arm).

Originally the plan was to give him a hood but I couldn’t make the hood work with the Terminator armour no matter how I tried. It didn’t look right coming from inside the armour and it didn’t flow well around the head if it was outside. Eventually I scraped off all the greenstuff and left him with just the half-cape that’s part of the Lysander figure. I added some Dark Angel iconography on one greave and the gorget by taking some of the small icons from the Dark Angel upgrade sprue, filing them flat on one side and then gluing them on to the armour. I also Dark Angelsed up the Thunderhammer by sandwiching some greenstuff between two of the helmet wings from the sprue and sticking that on where the fist used to be. The wings on his back are from the Warhammer Fantasy Empire General set, there’s a standard top which is a robed and winged skeleton carrying a scythe. All of that except for the wings were cut away and then the two separate wings were greenstuffed together and moulded somewhat to match the back of the armour. The Empire general also gave up his two handed sword which replaced the one from the Dark Angels sprue.

Once the figure was built, it was time to get on with painting it. To begin with I painted on a thin basecoat of Snakebite Leather all over the armour. I like to paint bone as yellowy, old bone rather than bleached white as it’s generally done so I start with quite a dark colour and work up from there. In this case I highlighted up with various mixtures of Snakebite Leather, Bleached Bone and Skull White. The final edge highlights are pure Skull White but the blending in between is mostly Bleached Bone. The green parts started with a base of Orkhide Shade and went through Goblin Green, Scorpion Green and Sunburst Yellow while the red was a base of Mechrite Red with blood red and Golden Yellow for highlights. I’ve warmed to the foundation paints recently, previously I never used them at all but I’m liking the depth of colour I can get with them even though I almost always start from a white undercoat.

The main problem I had with this figure was working out what colours to do the details. Particularly things like the purity seals, which are generally done with red seals and parchment tassels. In this case the red seals would have been lost against the red eagle on the cuirass while parchment tassels wouldn’t show up well against the bone armour. Eventually I decided to do them gold with greyish parchment. The cloak was another area that got redone once I realised my original plan wouldn’t work. I had planned to do it green and cream to match the Deathwing and the Dark Angels primary colours however this didn’t go well. Cream on the inside was too close to the armour colour and it didn’t frame well as a border colour. In the end I painted the inside green with a red border to tie in with Belial’s old company colours (argent a bend sinister gules). This heraldry is repeated on his back banner, his left kneepad and on two of the right shoulderpads.

These problems are why I like to ‘sketch in’ a figure before I start to work on highlighting and fancy work. Very often something that sounds sensible in your head doesn’t translate well to the actual miniature or you’ll realise that you’ve overlooked some detail that requires you to change your plans. You’ll see that the work in progress shots from the gallery are quite rough, there’s no highlighting to speak of, many of the lines are wobbly and there may even be blank bits. Once I’ve got a better idea of how the final figure will look and I’m happy with the scheme then I’ll tidy it up, work on the shading and add in the fiddly detail.

I played around a little with some non-metallic metal effects on this model. The sword on the back banner as well as the Power Sword and the bayonet on the Storm bolter are all done with slightly different nmm techniques. The back banner is done as shading with a chrome effect – very dark areas next to very light areas to suggest sharp contrasts of light. The Power Sword and bayonet on the other hand use a hatching effect to suggest a shimmering reflection on the blade.

Finally the base is from the 40k basing kit. The large pieces are a shade over 40mm across so I had to trim it down to size, the feet are pinned into it and then it was glued onto the standard 40mm round base.  It was painted black then drybrushed with Graveyard Earth, Terracotta and Fortress Grey before small clumps of static grass were added to break it up a little.

It’s getting posted off to England on Monday, let’s hope the new owner likes it!

You can see all the in-progress and final pictures of this figure in the gallery.

We’ve been keeping up steady progress on the 8 new WFB armies that were introduced in the previous update. Dawn and I have made the most progress by far but things have been coming along nicely with the others too. Grazyna has begun work on her Empire Knightly Orders in earnest while Mario has been assembling a horde of skeleton warriors. There was a bit of a pause due to the Easter holidays but despite that a lot has been completed. Dawn has painted most of her initial 500 point force and I have completely painted mine (ok, it was only 27 figures but still…). Dawn’s initial unit of 20 Night Goblins has been done as have all of her Squigs and the mounts for her cavalry. She only needs to finish off the Goblin and Savage Orc riders to hit her first target.

Meanwhile on a different painting table not so far away, Adam and Caz have been working through their piles of plastic. I gave Adam a painted Warhawk rider for his birthday to use as a hero and he’s added a large unit of Dryads to form the core of his force while Caz has been up to her elbows in Ghouls.

On the gaming front, things haven’t been so good. We had a couple of battles to get people familiar with the rules and the different army dynamics. Mario faced off against my Warriors of Chaos first and then against Dawn’s Greenskins and found that 500 points of Tomb Kings is not a very solid force at all. We’re going to push for 1000 point armies which will help him out a bit but he’s definitely going to find things are an uphill struggle in smaller games.

My initial 500 points is entirely done now. It consists of the Sorceror on a Disc, 10 Marauder Horsemen and 15 Marauders with flails. I also painted a familiar for my Sorceror which is magnetised, a second magnet has been greenstuffed under the disc so that he can ride shotgun as required. Next up for me are five Chaos Knights and a converted battlestandard bearer.

Shortly before Christmas, my local game store received one of the new plastic Tyranid Trygon kits for display purposes. As it happened, I was in there at the time and casually mentioned that I’d like to paint one but wasn’t going to buy one just to paint. The manager told me that I was welcome to paint the display copy once he’d magnetised it and so I ended up painting a modular Trygon/Mawloc.

Jakob spent some time magnetising each of the different options to make them interchangeable and this is mostly pretty straightforward. Each arm has a magnet in the ball joint and there is a corresponding magnet in the sockets. It’s worth spending some time here to make sure that the magnets in the arms are at a good angle. Each arm overlaps the one above it to a degree and thus needs to be splayed out a little to clear it. If you put the magnet in the same position for each arm then they won’t fit properly. The tail has a pin as well as a magnet and each tail tip has a magnet and a hole drilled in it to accept the pin to ensure that it lines up properly and doesn’t twist. The complicated area is the head as there are a lot of optional parts in a relatively small area and these need magnets in different places. The mandibles can be attached just like the arms as they have a simple ball and socket joint on each side but the two jaws present problems. The contact area for each jaw is quite small and the Mawloc mouth part is pretty large so needs a solid connection to hold it in place. Jakob was able to make the regular Trygon jaw fit by putting a magnet in the cavity within it which connects with one inside the head. These are some distance apart but with sufficiently powerful magnets, the attraction is enough to hold the jaw in place. The Mawloc mouth parts however don’t have a convenient space to hide a magnet in as they are spread open with no solid sections. My suggestion was to not magnetise it at all and have two pins running backwards from the back of the jaw into holes drilled in the head section to hold it in place. Jakob however used flat magnets greenstuffed to the back of the jaw and the front of the  head. I still think my solution was better but Jakob’s works although it needs a bit of cutting and greenstuffing to make everything fit. There are also different carapace sections for the top of the head but there wasn’t enough room to fit yet more magnets in the head so Jakob picked one and glued it in.

Once Jakob had assembled and magnetised the kit, it was handed over to me for painting. I sprayed it white and then deliberated on a colour scheme. Jakob wasn’t a fan of the standard Leviathan colours of purple and white and I think the Behemoth red and blue scheme looks too busy so I compromised on a purplish-brown with pale green scheme as a good contrast using non-standard colours. Tyranids are composed of two main textures: chitinous armour and ribbed flesh, I chose to make the armour dark and the flesh pale. To start with I painted all of the flesh areas with Rotting Flesh. This was then washed with Thraka Green and then highlighted with Rotting Flesh again. Once that was dry I glazed it with Enchanted Blue before applying final highlights of a Rotting Flesh/Bleached Bone mix. As this is quite a large model and there are lots of extra bits, this took some time.

The chitin was painted Scorched Earth initially and then washed with Asurmen Blue. This gave a very dark and warm purple that was almost black. I highlighted this with Leviathan Purple in small amounts of Skull White before glazing it with Lich Purple. Final highlights were in Warlock Purple mixed with Tentacle Pink. Highlighting chitin is relatively simple although it’s time consuming when dealing with the number of separate plates on the Trygon (plus all the different claws, mandibles and so forth). To start with the highlight was pretty subtle and was applied towards the trailing edge of each individual plate. Then the lighter highlights were painted on very quickly in thin lines down from the middle of the plate to the trailing edge. As the highlights get lighter these lines become shorter and more closely spaced, this provides a smooth highlight while keeping the chitinous feel. Finally edge highlights were painted around the vertices. The flesh inside the jaws was painted Tentacle Pink and washed with Leviathan Purple before highlighting with Bleached Bone, this provided a sufficient contrast with the rest of the model without making it look unnatural. The eyes were done in blue and painted as gems instead of irises and pupils.

The whole thing took me a while due mostly the sheer size of the beast. Highlighting that much flesh and that many plates is fiddly and time consuming even with a big brush and thin paint. Still once it’s together it looks pretty impressive.

Check out more pictures including work in progress shots on this gallery page.