Stormy Teacups

Yesterday was another evening mostly spent preparing things. I stuck together the last of the Daemonettes and the Horrors including the converted command group, converted my Masque of Dlaanesh into a battle standard bearer and assembled the Skarlock. I was going to convert him to be more Tzeentchy and less Cryxy but he’s not easy to cut about due to the flowing ribbon thing that goes from his hand all the way around – replacing his hand with something else woudl require finding some way of either removing that ribbon entirely or working it into the conversion which I’m not really up for trying at the moment.

I did get some painting done however, I mostly finished the Horrors, they just need some detailing and basing and I put the main shade on the Daemonettes. Both of those units should be finished tonight leaving me with two days to do the two Heralds which should be enough time to do a better job and maybe even tidy up the Screamers too.

Here are some pictures:

Musician and Standard Bearer for the Horrors

Mostly complete Daemonettes and Horrors

Painting with inks

Some people have asked me about painting with inks and how to avoid common problems. Firstly I think it woud be useful to talk a little bit about what inks are and what they are not. Firstly, they are not simply thinned down paint as a lot of people seem to believe, they are a very dense pigment concentrated in a thin medium. Those of you who use Citadel colours should note that there is a marked difference between the old citadel inks and the newer range. The old range were true inks while the newer ones are designed to be used as washes and tints rather than as inks. This means that the newer ones aren’t as pigmented and have different covering properties – mostly they have a much higher surface tension meaning that they cover more evenly and don’t flow off the raised areas as much as inks tend to.

Painting with inks can save you a lot of time as the colours will tend to shade themselves meaning you can save a couple of steps with a single coat. On the other hand, you’ll be dealing with a much reduced palette and inks don’t mix together very well – a darker colour will completely overwhelm a lighter one.

One of the common issues that people have is that the heavily shaded effect you get when you paint the inks on doesn’t always remain once they are dry. There are two separate points here that contribute to this.

Firstly don’t paint inks onto primer. Undercoat sprays leave a very porous primer coat on a figure and this will soak up the ink really well leaving you with a flat pastel effect rather than the shading that you wanted.  Paint the inked areas white (or whatever other base colour you’re using) first and apply inks onto paint instead.

Secondly, inks take a long time to dry – especially if you’re slapping them on as a wash. In that time they’ll do what gravity compels them to do and the excess (which is what you’re using for your shading) will run off. You need a secret weapon to make them dry before this happens. I use one of these:

Additionally note that for very strong shading effects or for particularly deep colours, you may need to apply several washes to an area to get the right depth of colour.

Hopefully that helps.

Anyway, here are the latest scores, as I said above though I should be back on track by tonight.

Points Painted Today : 0 points

Points Target Daily: 200 Difference: -200

Points Target Overall: 1000 Points Painted Overall: 780 Difference: -220

Figures Painted Today: 0

Figure Target Daily: 10 Difference: -10

Figure Target Overall: 50 Difference: -8
Read the next update here.